data acquisition boards features rohs compliant 2002/95/ec specifcations analog input channels 16 single-ended/ 8 differential (software programmable) resolution 12 bits max. sampling rate multi-channel, single gain: 1 ms/s multi-channel, multi gain: 600 ks/s multi-channel, multi gain, unipolar/bipolar: 400 ks/s fifo size 1,024 samples overvoltage protection 30 vp-p input impedance 100 m w /10 pf (off), 100 m w /100 pf (on) sampling modes software, onboard programmable pacer and external trigger modes pre-trigger, post-trigger, delay-trigger and about- trigger input range (v, software programmable) unipolar n/a 0 ~ 10 0 ~ 5 0 ~ 2.5 0 ~ 1.25 bipolar 10 5 2.5 1.25 0.625 accuracy (% of fsr 1lsb) 0.1 0.1 0.2 0.2 0.4 analog output (PCI-1712 only) channels 2 resolution 12 bits output rate 1 ms/s fifo size 32,768 samples output range (v, software programmable) internal reference bipolar 5, 10 unipolar 0 ~ 5, 0 ~ 10 external reference 0 ~ +x v @ +x v (-10 x 10) -x ~ +x v @ +x v (-10 x 10) slew rate 20 v/s driving capability 10 ma output impedance 0.1 w max. operation mode software polling, continuous output and waveform output accuracy inle: 1 lsb dnle: 1 lsb (monotonic) ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? digital input channels 16 compatibility 5 v/ttl input voltage logic 0: 0.8 v max. logic 1: 2.0 v min. digital output channels 16 compatibility 5 v/ttl output voltage logic 0: 0.8 v max. logic 1: 2.0 v min. output capability sink: 8.0 ma @ 0.8 v source: -0.4 ma @ 2.0 v pacer/counter channels 3 resolution 16 bits compatibility 5 v/ttl max. input frequency 10 mhz reference clock internal: 10 mhz, 1 mhz, 100 khz, 10 khz external frequency: 10 mhz max. general bus type pci v 2.2 i/o connector 1 x 68-pin scsi female connector dimensions (l x h) 175 x 100 mm (6.9" x 3.9") power consumption typical: +5 v @ 850 ma, +12 v @ 600 ma max: +5 v @ 1.0 a, +12 v @ 700 ma operating temperature 0 ~ 60 c (32 ~ 140 f) (refer to iec 68-2-1, 2) storage temperature -20 ~ 85 c (-4 ~ 185 f) storage humidity 5 ~ 95% rh non-condensing (refer to iec 68-2-3) ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? PCI-1712/l introduction PCI-1712 and PCI-1712l are powerful high-speed multifunction cards for the pci bus. they feature a 1 mhz 12-bit a/d converter, an onboard fifo buffer (storing up to 1024 samples for a/d, and up to 32,768 samples for d/a conversion). the PCI-1712 cards provide a total of up to 16 single-ended or 8 differential a/d input channels or a mixed combination, two 12-bit d/a output channels, 16 digital input/output channels, and three 10 mhz 16-bit multifunction counter channels. PCI-1712l is a low-cost version without analog output. 16 single-ended or 8 differential or a combination of analog inputs 12-bit a/d converter, with up to 1 mhz sampling rate programmable gain automatic channel/gain scanning onboard fifo memory (ai: 1,024 samples ao: 32,768 samples) two 12-bit analog output channels with continuous waveform output function (PCI-1712 only) 16-ch digital input and 16-ch digital output three 16-bit programmable multifunction counter/timers on 10 mhz auto-calibration (ai/ao) pci-bus mastering data transfer pre-, post-, about- and delay-trigger data acquisition modes for analog input channels flexible triggering and clocking capabilities ? ? ? ? ? ? ? ? ? ? ? ? 1 ms/s, 12-bit, 16-ch pci multifunction card
www.advantech.com/products online download PCI-1712/l pin assignments ordering information PCI-1712 1 ms/s, 12-bit high-speed multifunction pci card PCI-1712l 1 ms/s, 12-bit high-speed multi. pci card w/o ao pcld-8712 din-rail wiring board for PCI-1712/l pcl-10168-1 68-pin scsi shielded cable, 1 m pcl-10168-2 68-pin scsi shielded cable, 2 m adam-3968 68-pin din-rail scsi wiring board ? ? ? ? ? ?
|
